我们朂常见的环氧地坪颜色有艳绿、蓝色等，但是，不乏其他甲方因为特殊环境而选择其他颜色。我们朂直观看到的颜色是面涂层的颜色，好的无锡环氧地坪，颜色鲜亮纯正，没有色差。但是，在实际的施工中，我们会发现，环氧地坪表面出现了色差。关于色差出现的原因以及控制方法，下面我们来了解一下！

The most common colours of epoxy floor are bright green, blue and so on. However, there are many other colours that Party A chooses because of its special environment. The most intuitive color we can see is the color of the surface coating, good epoxy floor, bright and pure color, no color difference. However, in the actual construction, we will find that the surface of the epoxy floor appears color difference. Regarding the cause of color difference and the control method, let's get to know it below. 一、环氧地坪色差产生的原因：

1. Reasons for the color difference of epoxy flooring:

1、主剂和配料未搅拌均匀。环氧树脂面漆颜料发生沉淀，使用时没有搅拌均匀，导致环氧地坪施工后存在色差。

1. The main ingredients and ingredients are not stirred evenly. Sedimentation of epoxy resin topcoat pigments and uneven mixing in use result in color difference after construction of epoxy floor.

2、施工的不连续性导致。施工中一次配料过多，在施工容器里的面漆液体材料在阳光下暴晒。因为环氧环氧地坪面漆在温度严重不均衡的情况下会发生一定的化学反应和挥发，造成浓度发生变化。所以在涂抹时会和之前的颜色有差别。

2. The discontinuity of construction results. During the construction, there are too many ingredients at one time, and the topcoat liquid material in the construction container is exposed to the sun. Because the epoxy flooring varnish will undergo certain chemical reactions and volatilization in the case of serious temperature imbalance, resulting in changes in concentration. So there is a difference in color when applied.

3、购的环氧环氧地坪材料批次不同。有一些面积较大的环氧地坪工程中，施工队没有将环氧地坪材料一次性采购到位，有些分好几个批次购买，这就导致不同批次的环氧地坪面漆有色彩差异，在施工后就会发现地坪面涂有色差。

3. Different batches of epoxy flooring materials were purchased. In some large-scale epoxy flooring projects, the construction team did not purchase epoxy flooring materials in place at one time, and some were purchased in several batches, which led to different batches of epoxy flooring paints with different colours. After the construction, it will be found that there are colour differences on the flooring surface.

二、预防环氧地坪产生色差的方法：

2. The methods of preventing colour aberration of epoxy flooring:

1、环氧面漆在使用时一定要严格按照配比充分搅拌均匀，然后再使用。

1. When using epoxy topcoat, it must be stirred uniformly according to the proportion strictly, and then used.

2、环氧地坪施工时要坚持施工的连续性，并且要根据实际情况进行环氧地坪面漆的调配，保证用多少调配多少，这样既保证不浪费材料，还解决了色差问题。

2. In the construction of epoxy flooring, we should adhere to the continuity of construction, and make sure that the amount of epoxy flooring topcoat is adjusted according to the actual situation, so as not to waste materials, but also to solve the problem of chromatic aberration.

3、在采购环氧地坪材料的时候尽量采购同一批次的，并且尽量一次将材料采购完，如果采购了不同批次的材料，要把每个批次的材料独立放在一个区域，然后在施工使用时，一个区域的用同一批次的，这样就是面漆颜色有略微差异也不会影响工程的整体质量。

3. When purchasing epoxy flooring materials, try to purchase the same batch, and try to finish the material purchasing at one time. If purchasing different batches of materials, the materials of each batch should be placed in an area independently, and then when using in construction, the same batch of materials will be used in one area, which means that the color of topcoat is slightly slight. Differences will not affect the overall quality of the project.

三、环氧地坪出现色差处理办法：

3. Treatment of color difference on epoxy flooring:

如果无锡环氧地坪已经出现了色差，朂简单的办法就是重新滚涂一遍面漆。

If the epoxy flooring has color difference, the easiest way is to re-roll the finish.